|
TIC. The beams work a dream. One problem I experienced was the gap at the centre of the boom is only just large enuf to fit the cradle. When the beam is rotated the elements either side of the cradle get snagged. The easy remedy for this was to remove the two element brackets and replace them upside down which gives sufficient clearance. 73 Chris G3VHB ----- Original Message ----- From: Tommy Tow <WD4K@Bellsouth.Net> To: Force12Talk <Force12Talk@qth.com> Sent: Thursday, April 06, 2000 2:32 PM Subject: [Force 12 Talk] Sidemount C31's > Anyone have any experience with sidemounting a C31? I have posted to > Towertalk and have lots of opinions but not much real life experience with > actually doing it. Any help or suggestions will be appreciated. Thanks, 73, > Tommy WD4K > > > > -------------------------------------------- > Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. > Force 12 Web site: http://www.qth.com/force12 > > Submissions: send to Force12Talk@qth.com > To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com > Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk > For problems with the list, contact force12@qth.com > > -------------------------------------------- Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. Force 12 Web site: http://www.qth.com/force12 Submissions: send to Force12Talk@qth.com To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk For problems with the list, contact force12@qth.com |
This Thread
|
This Author (Apr-2000)
|