|
affect 20 much - more the element length, eh? I'll bet you find the same with the 19. ----- Original Message ----- From: "Charles T. Allen" <allencpa@sat.net> To: <Force12Talk@qth.com> Sent: Wednesday, August 02, 2000 8:13 AM Subject: [Force 12 Talk] C-19XR Instructions > Instruction 20 (d) for assembling the 20 meter driver says: "NOTE: the > initial proper rivet holes for the tip have one hole outside the .500" > section. Double check the drawing to ensure the proper holes are used. > The outside hole and inside hole are used for making slight VSWR slewing > adjustments if needed to shift the curve up or down." > > If one follows this direction, the length for the tip section (.375" OD) > does not agree with the drawing, i. e., 30.5". Assembling the tip with ALL > 3 rivet holes aligned results in a 30.5" length. > > Since it is MUCH easier to fix things on the ground than standing 90 feet up > the tower, I'd like to know which instruction to follow. Am I > mis-understanding something here? I prefer the antenna to be tuned for CW, > but I gather that tuning on 20 meters is done by adjusting the spacing > between turns on the hairpin coil, rather than element lengths. > > Any guidance will be appreciated. > > 73 de Chas W5DV > > > > -------------------------------------------- > Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. > Force 12 Web site: http://www.qth.com/force12 > > Submissions: send to Force12Talk@qth.com > To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com > Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk > For problems with the list, contact force12@qth.com > > > -------------------------------------------- Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. Force 12 Web site: http://www.qth.com/force12 Submissions: send to Force12Talk@qth.com To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk For problems with the list, contact force12@qth.com |
This Thread
|
This Author (Aug-2000)
|