| Index | Thread | Archive | Aug-2000 | Archive | Send |
 |
  |
 |
   |
|
  |
|
C31XR-H and I didn't want to weaken the next joint internally. I would like to know what I'm going to do when I change to 3 feedlines, ie +7.5" as using additional 1/4" dia tube is getting a bit silly. To answer John WA9ALS point no the 20m DE change did not alter the 10/15 m SWR which has been very low once I put the parallel lines very close together. 73 Clive GM3POI -----Original Message----- From: KJ6Y@aol.com <KJ6Y@aol.com> To: clive@gm3poi.prestel.co.uk <clive@gm3poi.prestel.co.uk>; Force12Talk@qth.com <Force12Talk@qth.com> Date: 11 August 2000 15:28 Subject: Re: [Force 12 Talk] C31XR on 20m >Clive, >If you need to lengthen it more you can move the 1/2" tubing out. I had to >do that to a C4SXL on ten meters and worked out ok. > >Skip, KJ6Y > > >-------------------------------------------- >Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. >Force 12 Web site: http://www.qth.com/force12 > >Submissions: send to Force12Talk@qth.com >To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com >Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk >For problems with the list, contact n4zr@qth.com > > > -------------------------------------------- Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. Force 12 Web site: http://www.qth.com/force12 Submissions: send to Force12Talk@qth.com To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk For problems with the list, contact n4zr@qth.com |
This Thread
|
This Author (Aug-2000)
|