Index Thread Archive Sep-2000 Archive Send
 Main index   Previous in threadNext in thread   Previous in archiveNext in archive   Index by Subject for Sep-2000Index by Author for Sep-2000Index by Date for Sep-2000   Index by Subject for ArchiveIndex by Author for ArchiveIndex by Date for Archive   Reply to messageNew message 

Subject: 2 inches Mast.
Author: fev <fev@ciudad.com.ar>
Date: 13-Sep-2000 18:54:11
I will install a C-31XR and a Mag 240 N with 7 feet separation using a
Crome Molybdenum 2 Outside Diameter Mast . The C-31XR will be so near as
posible to the Trustbearing at the top of the Tower.The Tower will be 60
feet high. Here in Buenos Aires wind are very seldom higher than 80 MPH.
The Mast has a thickness of aprox 4mm .
Is that more or less what other are using or the OD mast be bigger?.
Thanks Francisco LU3EEC.



--------------------------------------------
Force12Talk mailing list provided as a service by Force 12 Antennas, Inc.
Force 12 Web site: http://www.qth.com/force12

Submissions: send to Force12Talk@qth.com
To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com
Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk
For problems with the list, contact n4zr@qth.com


This Thread
  Date   Author  
15-Sep-2000 Steven Kline
15-Sep-2000 Steven Kline
* 13-Sep-2000 fev
This Author (Sep-2000)
  Subject   Date  
* 2 inches Mast. 13-Sep-2000
Mast Torque. 02-Sep-2000
RV: [Force 12 Talk] 2 inches Mast. 16-Sep-2000
RV: [Force 12 Talk] 2 inches Mast. 13-Sep-2000
test 24-Sep-2000
Test 02-Sep-2000