| Index | Thread | Archive | Sep-2000 | Archive | Send |
 |
  |
 |
   |
|
  |
|
I am using a 2 inch diameter mast. Cheers and 73 Steve - W5JK fev wrote: > Steve , thanks for your answer . > What Diameter of mast are you using ? > Francisco LU3EEC. > ----- Mensaje original ----- > De: Steven Kline <klines@agcs.com> > Para: Force12 Reflector <Force12Talk@qth.com> > Enviado: Viernes, 15 de Septiembre de 2000 07:44 p.m. > Asunto: Re: [Force 12 Talk] 2 inches Mast. > > > Francisco, > > > > I forgot to also add that I am using 9 ft of separation between the C-31XR > and the > > Magnum 240N. > > > > Steve - W5JK > > > > Steven Kline wrote: > > > > > Francisco, > > > > > > I have just received my C31XR and Magnum 240N. I have chosen to use a > 20 foot > > > Chromolly mast with a .375 inch wall thickness. I am putting these > antennas on > > > a US Tower, model HDX-572. I am using an Orion 2800 rotator to turn the > > > arrays. I opted for as much strength as I could afford as I may change > arrays, > > > stacking, additions, etc. down the road. This gives me a little extra > room to > > > play if desired. Better to error on over-engineering with all of the > winds we > > > have here in Dallas, Texas. Hope this helps. > > > > > > Cheers and Gud DX, > > > > > > Steve Kline - W5JK > > > > > > fev wrote: > > > > > > > I will install a C-31XR and a Mag 240 N with 7 feet separation using > a > > > > Crome Molybdenum 2 Outside Diameter Mast . The C-31XR will be so near > as > > > > posible to the Trustbearing at the top of the Tower.The Tower will be > 60 > > > > feet high. Here in Buenos Aires wind are very seldom higher than 80 > MPH. > > > > The Mast has a thickness of aprox 4mm . > > > > Is that more or less what other are using or the OD mast be bigger?. > > > > Thanks Francisco LU3EEC. > > > > > > > > -------------------------------------------- > > > > Force12Talk mailing list provided as a service by Force 12 Antennas, > Inc. > > > > Force 12 Web site: http://www.qth.com/force12 > > > > > > > > Submissions: send to Force12Talk@qth.com > > > > To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com > > > > Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk > > > > For problems with the list, contact n4zr@qth.com > > > > > > -------------------------------------------- > > > Force12Talk mailing list provided as a service by Force 12 Antennas, > Inc. > > > Force 12 Web site: http://www.qth.com/force12 > > > > > > Submissions: send to Force12Talk@qth.com > > > To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com > > > Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk > > > For problems with the list, contact n4zr@qth.com > > > > > > > > -------------------------------------------- > > Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. > > Force 12 Web site: http://www.qth.com/force12 > > > > Submissions: send to Force12Talk@qth.com > > To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com > > Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk > > For problems with the list, contact n4zr@qth.com > > > > > > -------------------------------------------- > Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. > Force 12 Web site: http://www.qth.com/force12 > > Submissions: send to Force12Talk@qth.com > To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com > Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk > For problems with the list, contact n4zr@qth.com -------------------------------------------- Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. Force 12 Web site: http://www.qth.com/force12 Submissions: send to Force12Talk@qth.com To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk For problems with the list, contact n4zr@qth.com |
This Thread
|
This Author (Sep-2000)
|