| Index | Thread | Archive | Sep-2000 | Archive | Send |
 |
  |
 |
   |
|
  |
|
J have a C19XR up 70 ft near my 140 ft vertical 160 m since six months and I have not problem for adjust swr on the 3 bands. the plate is located to 111 ft and the parallel feedlines are located near the plate boom. For the low swr adjust the spacing between turns on the hairpin coil for 20 m on 15 m adjust the parrallel wires here the spacing wires is 1'' . TO BE SURE THE WIRE COAX ARE 2 1/2'' before connect to 10m driver . J have added a second spacer between 20m and 15m driver because the wind affect swr . The success of my installation is in the reading of the manual Good luck Hube // F6CWA // topbander -----Message d'origine----- De : . <u1016413@warwick.net> À : force12talk@qth.com <force12talk@qth.com> Date : mercredi 13 septembre 2000 03:42 Objet : [Force 12 Talk] C19XR boom plate >What is the location of the boom plate on the C19XR?? Instruction place >it between the 20m and 10m Driven elements. This is right next to the >parallel driver wires. Any thoughts?? Having trouble with VSWR high on >all bands. > >Dan WV2V > > > > >-------------------------------------------- >Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. >Force 12 Web site: http://www.qth.com/force12 > >Submissions: send to Force12Talk@qth.com >To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com >Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk >For problems with the list, contact n4zr@qth.com > > -------------------------------------------- Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. Force 12 Web site: http://www.qth.com/force12 Submissions: send to Force12Talk@qth.com To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk For problems with the list, contact n4zr@qth.com |
This Thread
|
This Author (Sep-2000)
|