Index Thread Archive Jun-2001 Archive Send
 Main index   Previous in threadNext in thread   Previous in archiveNext in archive   Index by Subject for Jun-2001Index by Author for Jun-2001Index by Date for Jun-2001   Index by Subject for ArchiveIndex by Author for ArchiveIndex by Date for Archive   Reply to messageNew message 

Subject: C3S - Adjusting 10m SWR curve ?
Author: Marty Tippin <ki0lo@yahoo.com>
Date: 19-Jun-2001 09:29:15
I have a C3S up and it works fine - only issue I have is that
the SWR is lowest at about 29MHz, rising to well over 2:1 at
28.300.

How can I adjust the point of lowest SWR on 10m without screwing
up the other bands? The parasitic nature of the driven elements
makes me think it's not as simple as adding a few inches to the
10m driven.

15 and 20 are not bad - 20 shows acceptable SWR across the band,
and 15 is a little bit low but not worth worrying about.

-Marty NW0L
martyt@pobox.com

__________________________________________________
Do You Yahoo!?
Spot the hottest trends in music, movies, and more.
http://buzz.yahoo.com/


--------------------------------------------
Force12Talk mailing list provided as a service by Force 12 Antennas, Inc.
Force 12 Web site: http://www.qth.com/force12

Submissions: send to Force12Talk@qth.com
To unsubscribe: send a blank e-mail to Force12Talk-leave@qth.com
Force12Talk Message Archive: http://www.qth.com/force12/list/force12talk
For problems with the list, contact n4zr@qth.com


This Thread
  Date   Author  
19-Jun-2001 Richard Thorne
19-Jun-2001 Guy Olinger, K2AV
19-Jun-2001 Marty Tippin
19-Jun-2001 gary.hosler@kodak.com
19-Jun-2001 Marty Tippin
19-Jun-2001 Guy Olinger, K2AV
19-Jun-2001 Richard Thorne
* 19-Jun-2001 Marty Tippin
This Author (Jun-2001)
  Subject   Date  
C3S - Adjusting 10m SWR curve ? 19-Jun-2001
C3S - Adjusting 10m SWR curve ? 19-Jun-2001
* C3S - Adjusting 10m SWR curve ? 19-Jun-2001