|
now! I put the 10m driver (#6) together and THOUGHT I counted 4 holes in the tip of the element. The manual says there is an adjustment of +/- 2 holes so I left 2 holes exposed thinking this would move the resonant point to 28.30 (28.800 - 2 x 250kHz). Now I'm putting the 15meter driver together and I KNOW it has 4 holes in the tip of the element. As I am deciding where I want to set it (125kHz per hole) I realize that 2 holes in the larger element and 4 in the smaller part only gives me an adjustment of +/- one! Hmmm. That is the same thing I had on the 10meter driver - wasn't it? Before I drill the rivets on the 10m element to see if there are really 5 holes, can someone tell me for sure how many holes are in the tip of the 10m driver (#6)? If there are only 4, how the heck do I get +/- 2 holes of adjustment? Mike / W8DN ----- Original Message ----- From: "Mike Rhodes" <weightdn@adelphia.net> To: <Force12Talk@qth.com> Sent: Sunday, September 14, 2003 7:06 PM Subject: C4SXL 10M Refl Assy ?? > Hi All, > > Putting my C4SXL together and just ran into a problem. Suspect it is a > missprint in the manual but not 100% sure. > > Anyhow, the manual says there is an extra hole for adjustment up or down the > band, This same note appears for the 10meter refl (#3) and the 10meter > driver (#6). In addition there is a note on the C3S drawing which correctly > states there are holes which allow adjustment of + or - 2 holes for a change > of 250khz per hole on el #6. No mention is made of el #3 and, in fact, the > three holes in the tip of #3 will align only one way! My guess is the manual > is wrong and there is no adjustment for the reflector. Can anyone confirm > this? Worries me in that I would expect the manual to be nearly perfect > after this much time! > > In the mean time I guess I will move on to another element. Thanks. > > 73 & DX de > Mike / W8DN > -------------------------------------------- Force12Talk mailing list provided as a service by Force 12 Antennas, Inc. Force12 Web Site: http://www.force12inc.com To Submit Message to the List: Force12Talk@qth.com To unsubscribe and view the Message Archive: see http://qth.com/force12/list For problems with the list: contact force12@qth.com |
This Thread
|
This Author (Sep-2003)
|